Product details:
Product Usage:
Rock slab composite structural adhesive is mainly used for rock slab, high-end marble indoor and outdoor dry hanging, point hanging, and hand washing table bonding; Wall renovation without slotting and re pasting; Permanent bonding of rock and wood furniture; It is also suitable for mutual bonding of various materials (such as copper, aluminum, iron, steel, glass bricks, artificial stone, ceramics, etc.), with high strength, safety and no odor.
Scope of application:
Composite, installation, point hanging, and bonding of rock slab ceramic tiles and basins under the rock slab platform.
Construction method:
1. Clean the surface of the substrate to be bonded, keeping it dry, free of debris and oil stains (smooth surfaces need to be roughened)
2. Use a scraper to remove the required amount of adhesive A and adhesive B (in a ratio of 1:1), and mix the adhesive A and adhesive B thoroughly
Uniform, the appearance and color of the mixed colloid are consistent. 3. The mixed colloid needs to be used up within the specified time (30 minutes). If it is not used at this time
Internal use can lead to a decrease in adhesive strength, making it unusable.
matters needing attention:
1. If the bonding surface is too smooth, it is recommended to first perform surface roughness treatment.
2. The bonding surface should be dry, dust-free, free of oil stains, debris, etc., and should be fully coated with colloids. If the bonding surface is damp or the construction environment temperature is high, it is also easy to cause yellowing, yellowing, and pollution of the rock slab.
3. The mixing ratio of A glue to B glue is 1:1, and it should be thoroughly stirred evenly. If the ratio is incorrect or the mixing is uneven, it will cause the glue to not solidify, the glue adhesion to decrease, and the unreacted part will seep around the rock slab, resulting in leakage, yellowing, yellowing, and pollution of the rock slab.
4. The rock slab composite structural adhesive cannot bear weight in the initial stage (if quick positioning is required, the brand marble adhesive produced by our company can be used).
5. The surface drying time after mixing (at room temperature of 25 ° C) is 30-60 minutes, fully cured within 24 hours, and reaches the corresponding strength.
6. If it is necessary to hang large rock slabs or ceramic tiles over 1.2 meters, steel components must be attached, and the composite structural adhesive of the rock slab can only serve as an auxiliary function.
7. Before large-scale use, please conduct a small-scale test and only proceed with construction after passing the inspection.
8. The construction temperature cannot be lower than 4C. When the construction temperature exceeds 45 ° C, there will be slight sagging of the colloid.
Storage: Store in a dry and cool place at a temperature of 15-24 ° C
Shelf life: 12 months (stored at room temperature and cool).
