Product details:
Main purpose:
Widely used for 45 ° angle splicing of various rock slabs and composite use of rock slabs with stainless steel, iron, wood, etc. It can also be used for various composite material slabs such as granite, quartz, artificial marble, etc.
Product Introduction:
1. This product is a two-component fast curing epoxy material. By modifying the epoxy resin and curing agent, it endows the adhesive with high bonding strength, earthquake resistance, moisture curing, yellowing resistance, weather and frost resistance, high brightness, and easy operation.
2. Suitable for bonding and 45 ° splicing of various composite materials such as natural stone, artificial stone, quartz stone, ceramic tiles, and strict processing.
characteristic:
1. Moderate viscosity, with good handling performance in both horizontal and vertical surfaces, no sagging, and a gentle touch;
2. It can be constructed in a humid environment (humidity of 95%) and is not significantly affected by the water content in the environment;
3. Fast curing speed (4-12 minutes), mechanical polishing can be carried out in 25 minutes;
4. Strong adhesion, waterproof, oil resistant, environmentally friendly, and frost resistant.
usage method:
1. Clean the surface to be constructed, and the bonding surface should be smoothed and polished clean, without dust and oil stains.
2. Install the rubber hose into the glue gun, remove the front cover, pull the trigger of the glue gun until the AB glue hole simultaneously releases glue, then install the static mixer. Do not use the first 30mm after the mixer releases glue, and then proceed with normal glue application.
3. The curing time at room temperature of 25 ℃ is 4-12 minutes, and after 25 minutes, it can be polished. The curing time may vary slightly depending on the temperature.
4. Before large-scale use, a small test should be conducted to confirm and inspect before construction can proceed.
5. The original sealed storage period at room temperature is 12 months.
Note: Please try to use it all at once during construction. If you stop working for more than 5 minutes, the glue in the mixer will thicken, which will affect the bonding strength and make it difficult to apply glue. If the shutdown lasts for more than 5 minutes, please replace the mixer and re glue 30mm before discarding it.
